Connecting Clip-Connector Heath Plus is used to connect an infrared film to an electrical circuit. Installed inside the film over the copper bus. Compressed by hand press.
The clip provides electrical contact of the wire and copper bus, which allows to significantly reduce the time for installation of the warm floor system.
characteristics
| Thickness | up to 5 mm |
| Width | two blades 1 cm each |
| Height | 2,7 cm |
| Packaging | 500 items |
characteristics
| Thickness | up to 5 mm |
| Width | two blades 1 cm each |
| Height | 2,7 cm |
| Packaging | 500 items |
description
Connector clip-connector Hit Plus of tin-plated copper alloy is used for the installation of a heating system to connect the infrared film to the electrical circuit.
One blade of the clip is installed inside the film over the copper bus, the second blade compresses the film from the outside for fixation. The clip is fixed with the help of a hand press or a manual vice.
The clip provides electrical contact of the wire and copper bus with low resistance and allows to significantly reduce the time for installation of the warm floor system.
characteristics
| Length | 2,7 сm |
| Width | 1+1 сm |
| Thickness | 3 mm |
| Temperature mode | to +200 ℃ |
composition
Tinned copper alloy.
Application
Used to connect the infrared film to the electrical circuit.
